Networking components for OEMS and Systems Integrators, Pittsburgh, PA VOLUME DISCOUNTS * BLIND SHIPPING * REVERSE ENGINEERING

Call today: 1-800-568-1932

USB Extenders

We are not limited to the items below.  Please call 1-800-568-1932 if you need a cable not listed below or need product details.

PART NUMBER DESCRIPTION
USBEXT-16 USB Extender - The USB specification limits the length of a cable segment between the host or hub and device to 5 meters. This USB 2.0 compliant active extension cable by GoldX® PlusSeries® taking the signal from the first device and resynchronizes and retimes the signal so it can be transmitted another 5 meters without any problems. Maximum recommended daisy chaining of these devices is 3 units without adding a powered USB hub. USB extender
USBEXT-150  USB Superbooster Extender - This pocket-sized device extends the distance of a USB device to a host computer up to 150 feet so you can place your USB camera, printer, web cam, keyboard/mouse extension, or any other USB device exactly where you want it! This booster is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.

This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you're up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.

Base Connectors: One USB Type A Male and One RJ45 Female
Remote Connectors: One USB Type A Female and One RJ45 Female
USB extenders
P/N: USB-SB-WP USB Superbooster Wall Plate Kit - This wall plate solution extends the distance of a USB device to a host computer up to 150 feet so you can place your USB projector, interactive whiteboard, camera, printer, web cam, hub, or any other USB device exactly where you want it! This wall plate is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.

This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.

Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. These wall plates fit standard J-boxes, and are compatible with Leviton Decora® brand cover plates. Compliant with USB Specification 1.1.

Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
USB extenders
USB extenders

 

Pittsburgh Website Design by The Write Design, LLC.